Some selected publications from last 15 years are shown here

  1. Mahmoudvand, S., Jiang, Z., Zhou, C., Sorbie, K.S., and Skauge, A. “The immiscible to miscible transition and its consequences for 3-phase displacements in porous media of arbitrary wettability: Comparison of 3D pore network results with basic theory”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 705, 2025, https://doi.org/10.1016/j.colsurfa.2024.135673
  2. Skauge, Tormod, Skauge, Arne, Lugo, Nancy, and Geoffrey Johnson. “How Polymer Flooding Reduces CO2 Emissions and Energy Consumption – An Exergy Return on Exergy Investment Case Study.” Paper presented at the SPE Improved Oil Recovery Conference, Tulsa, Oklahoma, USA, April 2024. doi: https://doi.org/10.2118/218231-MS
  3. Mahmoudvand, S., Sorbie, K.S., Skauge, A., „The immiscible to miscible transition and its consequences for 3-phase displacements in porous media of arbitrary wettability: Basic theory” Colloids and Surfaces A: Physicochemical and Engineering Aspects, 699, 2024, https://doi.org/10.1016/j.colsurfa.2024.134737
  4. Perez-Perez, A., Romero, C., Santanach-Carreras, E., Skauge, A., Simulations of Alkali-Polymer Experiments: Modeling of In-Situ Emulsion Generation and Transport of Oil-in-Water Emulsion in Porous Media, 2023, EUROPEC 23, SPE-214429-MS, https://doi.org/10.2118/214429-MS
  5. Menezes, D.E.S.; Santos, S.M.G.; Botechia, V.E.; Skauge, A.; Schiozer, D.J., Numerical simulation study of relative permeability hysteresis in a fractured carbonate reservoir subjected to water-alternating-gas injection (WAG-CO2), 2023, SPE Annual Tech. Conf. and Exhibition, San Antonio, SPE 230123-MS
  6. Chang, P.L.K.C., Skauge, A., Sorbie K.S., Rios, V., Kumar, K., Modelling of Gas Injection, Immiscible WAG and Near-Miscible WAG, Unstable Flow in Heterogeneous Reservoirs, EAGE IOR+ den Haag, Oct. 2023
  7. Skauge A., Caetano Chang P.L.K., Sorbie K.S.; New Possibilities with the Novel Modelling Approaches developed for WAG and FAWAG, ADIPEC, SPE-216403-MS, Oct. 2023, https://doi.org/10.2118/216403-MS
  8. Beteta, A., Sorbie, K.S. Skauge, A., and Skauge, T., Immiscible Viscous Fingering: Effects of Wettability/Capillarity and Scaling, TIPM, 2023
  9. Skauge, T., Ormehaug, P.A., AlSumaiti, A., Masalmeh, S., and Skauge, A., Polymer Stability at Harsh Temperature and Salinity Conditions, SPE-200176, SPE conference at the Oman Petroleum and Energy Show, 21-23 March 2022, https://doi.org/10.2118/200178
  10. Salmo, I., Alzaabi, M. A., Sorbie, K., Skauge, A.: Modelling Immiscible Viscous Fingering: History Match of Water Flood at Different Adverse Mobility Ratio. Transp. in Porous Med (TIPM)145, 291–322 (2022). https://doi.org/10.1007/s11242-022-01847-8
  11. Beteta, A.,  Sorbie, K.S. and Skauge, A., Immiscible Viscous Fingering: The Simulation of Tertiary Polymer Displacements of Viscous Oils in 2D Slab Floods, Polymers 2022, 14, 4159. https://doi.org/10.3390/polym14194159
  12. Skauge A., Skauge T., Sorbie K.S., Bourgeois M., Chang P.L., Impact of Viscous Instabilities on WAG Displacement, SPE-211448-MS, presented at 2022 ADIPEC, Abu Dhabi International Petroleum Exhibition & Conference, https://doi.org/10.2118/211448
  13. V. de Souza Rios, D.J. Schiozer, L.O. Schmall dos Santos, A. Skauge, (2021) Improving Coarse-Scale Simulation of Fluid Flow in Porous Media with a Dual-Porosity Dual-Permeability Upscaling Technique Based on Flow and Storage Capacity and Lorenz Coefficient, Journal of Petroleum Science and Engineering, Volume 198, March 2021, 108132, https://doi.org/10.1016/j.petrol.2020.108132
  14. Wang, Gang; Pickup, Gillian; Sorbie, Kenneth; Mackay, Eric; Skauge, Arne, (2021) Multi-physics approach to modelling near-miscible CO2-WAG process, Journal of Petroleum Science and Engineering, Volume 198, March 2021, 108165, https://doi.org/10.1016/j.petrol.2020.108165
  15. Iselin C. Salmo, Ken S. Sorbie and Arne Skauge, (2021) The Impact of Rheology on Viscous Oil Displacement by Polymers Analyzed by Pore-Scale Network Modelling, Polymers, 2021, 13(8), 1259, https://doi.org/10.3390/polym13081259
  16. Alzaabi, M. A., Hinestrosa, J., Skauge, A. and Masalmeh, S. (2021): Analysis and Simulation of Polymer Injectivity Test in a High Temperature High Salinity Carbonate Reservoir. Polymers, 2021, 13 (11), 1765-1786; https://doi.org/10.3390/polym13111765
  17. Victor de Souza Rios, Arne Skauge, Ken Sorbie, Gang Wang, Denis José Schiozer and Luiz O. S. dos Santos, Differences in the Upscaling Procedure for Compositional Reservoir Simulations of Immiscible and Miscible Gas flooding, SPE Virtual Reservoir Simulation Conference 2021, SPE-203970-MS, https://doi.org/10.2118/203970-MS
  18. Skauge, A., Sorbie, K.S., Salmo, I.C., Skauge, T.; Systematic Modelling of Unstable Displacement, SPE-207493-MS, Abu Dhabi International Petroleum Exhibition & Conference, Nov 15-18, 2021. https://doi.org/10.2118/207493-MS
  19. Skauge, T., Sorbie, K.S., Al-Sumaiti, A., Masalmeh, S.K., Skauge, A.; Polymer In-Situ Rheology in Carbonate Reservoirs, 2021, SPE-207786_MS, Abu Dhabi International Petroleum Exhibition & Conference, Nov. 15-18, 2021. https://doi.org/10.2118/207286-MS
  20. Badar Al Shakri, (supervisor; A. Skauge) Polymer Injectivity, Experimental Studies of Flow in Porous Media for EOR Polymers, PhD thesis, 12th February 2021.
  21. Mohamed Alzaabi,(supervisor A.Skauge) Analysis of Polymer Injectivity in Porous Media, PhD thesis 2 July 2021
  22. K.S. Sorbie, A. Y. Al Ghafri, A. Skauge and E.J. Mackay, On the Modelling of Immiscible Viscous Fingering in Two Phase Flow in Porous Media Transport in Porous Medium, 2020
  23. Aarra, M.G., Murad, A.M., Solbakken, J.S., and Skauge, A., Foam Dynamics in Limestone Carbonate Cores, ACS Omega, 2020
  24. de Souza Rios, V., Skauge, A., Sorbie, K.S., Wang, G., Schiozer, D.J., Schmall dos Santos, L.O., Upscaling Highly Detailed Heterogeneous Reservoirs Under Near-Miscible WAG flood, submitted to Journal of Petroleum Science and Engineering, 2020
  25. de Souza Rios, V., Schiozer, D.J., Schmall dos Santos, L.O., Skauge, A., Improving Coarse-Scale Representation of Water Flooding Simulation in 3-D Highly Heterogeneous Systems with a Dual-Porosity Dual-Permeability Upscaling Technique Based on Flow and Storage Capacity, and Lorenz Coefficient, submitted to SPE Journal, 2020
  26. Gang Wang, Gillian Pickup, Kenneth Sorbie, Eric Mackay, Arne Skauge, Numerical study of CO2 injection and the role of viscous crossflow in near-miscible CO2-WAG, Journal of Natural Gas Science and Engineering, 74 (2020) 103112
  27. Arne Skauge A., Solbakken J., Ormehaug PA., and Aarra MG., Foam Generation, Propagation and Stability in Porous Medium, Transport in Porous Media, (2020) 131, 5–21, https://doi.org/10.1007/s11242-019-01250-w
  28. Jørgen Gausdal Jacobsen, Tormod Skauge, Ken Sorbie, and Arne Skauge, Qualification of New Methods for Measuring In-Situ Rheology of Non-Newtonian Fluids in Porous Media, Polymers, 2020, 12(2), 452; https://doi.org/10.3390/polym12020452
  29. Arne Skauge, Tormod Skauge, Shahram Pourmohaadi, Jonas Solbakken, Abduljelil Kedir, Ketil Djurhuus, Ali Al-Sumaiti, Shehadeh Masalmeh, Low Polymer Retention opens for Field Implementation of Polymer Flooding in High Salinity Carbonate Reservoirs, SPE-202809-MS, ADIPEC, 2020
  30. T. Skauge, P. A. Ormehaug, A. Al-Sumaiti, S. Masalmeh, A. Skauge, Polymer Stability at Harsh Temperature and Salinity Conditions, SPE-200178O-MS, 9-11 March 2020, the SPE Conference at Oman Petroleum & Energy Show, Muscat, Oman
  31. A. Skauge, B. Shaker Shiran, P. Ormehaug, E. Santanach Carreras, A. Klimenko, D. Levitt, X-ray CT Investigation Of Displacement Mechanisms For Heavy Oil Recovery By Low Concentration HPAM Polymers, SPE-200461-MS 18-22 April 2020, Tulsa, Oklahoma, USA.
  32. Salmo, N. Zamani, T. Skauge, K. Sorbie, A. Skauge, Use of Dynamic Pore Network Modeling to Improve our Understanding of Experimental Observations in Viscous Oil Displacement by Polymers, SPE-200387-MS, 18-22 April 2020, Tulsa, Oklahoma, USA.
  33. Fabbri C., de-Loubens R., Skauge A., Hamon G., Bourgeois M., Effect of initial water flooding on the performance of polymer flooding for heavy oil production, Oil & Gas Science and Technology Journal, – Rev. IFP Energies nouvelles 75, 19 (2020), https://doi.org/10.2516/ogst/2020008
  34. Mohamed Adel Alzaabi *, Jorgen Gausdal Jacobsen, Shehadeh Masalmeh, Ali Al Sumaiti, Øystein Pettersen, Arne Skauge, Polymer Injectivity Test Design Using Numerical Simulation, Polymers, 2020, 12, 801; doi:10.3390/polym12040801
  35. Sorbie Ken, Skauge Arne; Mobilization of By-Passed Oil by Viscous Crossflow in EOR Processes, IOR 2019, 20th European Symposium on IOR, Pau France April 2019, paper 155
  36. Skauge Arne , Sorbie, Ken, Van Dijke, Rink; Modelling the Transition between Immiscible and Miscible WAG, IOR 2019, 20th European Symposium on IOR, Pau France April 2019IOR 2019, Pau, paper, 151,
  37. Zamani, Nematollah, Salmo Iselin, Sorbie Ken, Skauge Arne; Numerical Study of Polymer Flow in Porous Media using Dynamic Pore Network Modelling, IOR 2019, 20th European Symposium on IOR, Pau April 2019IOR 2019, Pau France April 2019, paper 152,
  38. Jacobsen Jørgen, Alzaabi Mohamed, Skauge Tormod, Sorbie Ken, Skauge Arne; Analysis and Simulation of Polymer Injectivity, IOR 2019, 20th European Symposium on IOR, Pau France April 2019,
  39. Liu, N., Skauge, T., Landa-Marbán, D., Hovland, B., Thorbjørnsen, B., Radu, F. A., … & Bødtker, G. (2019). Microfluidic study of effects of flow velocity and nutrient concentration on biofilm accumulation and adhesive strength in the flowing and no-flowing microchannels. Journal of Industrial Microbiology and Biotechnology, 46(6), 855-868.
  40. Al-Shakry, B., Skauge, T., Shiran, B.S., and Skauge, A., Polymer Injectivity: Investigation of Mechanical Degradation of EOR Polymers Using In-Situ Rheology, Energies 2019, 12(1), 49; doi:10.3390/en12010049
  41. Landa-Marbán, D., Liu, N., Pop, I.S., Kumar, K., Pettersson, P., Bødtker, G., Skauge, T. and Radu, F.A. A Pore-Scale Model for Permeable Biofilm: Numerical Simulations and Laboratory Experiments. Transp Porous Med 127, 643–660 (2019). https://doi.org/10.1007/s11242-018-1218-8
  42. G. Wang, G.E. Pickup, K.S. Sorbie, E.J. Mackay, and A., Skauge; The Analysis Of Near-Miscible CO2 WAG Displacements: The Distinction Between Compositional And Interfacial Tension Effects, SPE 193907, SPE Reservoir Simulation Conference 10 – 11 Apr 2019 Moody Gardens Hotel and Convention Center Galveston, Texas, USA
  43. Al-Shakry, B., Shiran, B.S., Skauge, T., and Skauge, A., Polymer Injectivity: Influence of permeability in the Flow of EOR Polymers in Porous Media, 2019, SPE-195495-MS, SPE Europec featured at 81st EAGE Annual Conference & Exhibition, 3-6 June 2019, London, UK
  44. Skauge, A., Solbakken, J., Ormehaug, P.A., and Aarra, M.G., Foam Generation, Propagation, and Stability in Porous Medium, Transport in Porous Medium, online 2019, https://doi.org/10.1007/s11242-019-01250-w
  45. Arne Skauge, Morten Gunnar Aarra, Per Arne Ormehaug, Jonas Solbakken, Kristian Mogensen, and Shehadeh Masalmeh; Preparations for Foam Gas Shut Off in Carbonate Reservoirs, SPE-197640-MS, ADIPEC 2019
  46. Shehadeh Masalmeh, Ali AlSumaiti, Nicolas Gaillard, Frederic Daguerre, Tormod Skauge, and Arne Skauge; Extending polymer flooding towards high-temperature and high-salinity carbonate reservoirs, SPE-197xxx-MS, ADIPEC 2019
  47. G. Wang, G.E. Pickup, K.S. Sorbie, E.J. MacKay, A. Skauge, Numerical Study of CO2-EOR and the role of viscous crossflow on Oil Recovery in Near-Miscible CO2-WAG Displacement, JNGSE, Journal of Natural Gas Science and Engineering, 2019
  48. Jacobsen, J. G, Skauge, T, Sorbie, K, S, and Skauge, A., Qualification of a New Method for Measuring In-Situ Rheology of Non-Newtonian fluids, Energies, Polymers, 2019
  49. Vik, B., Kedir, A.S., Kippe, V., Sandengen, K., Skauge, T., Solbakken, J., Zhu, D. Viscous Oil Recovery by Polymer Injection; Impact of In-Situ Polymer Rheology on Water Front Stabilization, 2018, accepted for presentation at the SPE EUROPEC Conference, 11-14th June, Copenhagen, Denmark, SPE-190866-MS
  50. Al-Shakry, B., Shiran, B.S., Skauge, T., and Skauge, A., Enhanced Oil Recovery by Polymer Flooding: Optimizing Polymer Injectivity, SPE-KSA-110-MS, presentation at the SPE Kingdom of Saudi Arabia Annual Technical Symposium and Exhibition held in Dammam, Saudi Arabia, 23–26 April 2018. Society of Petroleum Engineers. doi:10.2118/192437-MS
  51. Skauge, A., Zamani, N., Jacobsen, J.G., Shiran, B.S., Al Shakry, B., and Skauge, T., Polymer flow in porous media: Relevance to Enhanced Oil Recovery, Colloids and Interfaces 2018, 2, 27; doi:10.3390/colloids2030027.
  52. Al-Shakry B., Skauge, T., Shaker Shiran, B., and Skauge, A. Impact of Mechanical Degradation on Polymer Injectivity in Porous Media, Polymers 2018, 10, 742. DOI: 10.3390/polym10070742
  53. Viken, A.L., Spildo, K., Reichenbach-Klinke, R., Djurhuus, K., Skauge, T., “Influence of Weak Hydrophobic Interactions on in Situ Viscosity of a Hydrophobically Modified Water-Soluble Polymer“, Energy Fuels, 2018, 32, 89-98.
  54. Badar Al-Shakry 1, 2 , Tormod Skauge 3 ,Behruz Shaker Shiran 2 and Arne Skauge 1, 3, Polymer Injectivity: Investigation of Mechanical Degradation of EOR Polymers Using In-Situ Rheology, Energies online 24.12.2018.
  55. Viken, A. L., Skauge, T., Svendsen, P.E., Time, P.A. and Spildo, K., Thermothickening and Salinity Tolerant Hydrophobically Modified Polyacrylamides (HMPAMs) for Polymer Flooding, Energy Fuels, 2018, DOI: 10.1021/acs.energyfuels.8b02026
  56. Salmo, I.C., Pettersen, Ø., and Skauge, A., Polymer Flooding at Adverse Mobility Ratio – Acceleration of Oil Production by Crossflow into Water Channels; Energy Fuels, 2017, 31 (6), pp 5948–5958, DOI: 10.1021/acs.energyfuels.7b00515
  57. Zamani, N., Kaufmann, R., Bondino, I., and Skauge, A., Computation of polymer in-situ rheology using direct numerical simulation, Journal of Petroleum Science and Engineering, Volume 159, November 2017, Pages 92-102, doi.org/10.1016/j.petrol.2017.09.011
  58. Salmo, Iselin Cecilie. Supervisors Arne Skauge; Øystein Pettersen, Modeling of Polymer Flooding at Adverse Mobility Ratio. Universitetet i Bergen 2017 (ISBN 978-82-308-3996-6)
  59. Shaker Shiran Behruz and Skauge Arne, Low salinity polymer flooding as a hybrid EOR process, First International Conference on Improved/Enhanced Oil and Gas Recovery, 22-24 April 2017, Tehran, Iran.
  60. Kedir, A., Seland, J., Skauge, A. and Skauge, T., Reentrant Transition of Aluminum-Cross-Linked Partially Hydrolyzed Polyacrylamide in a high salinity solvent by Rheology and NMR, Journal of Applied Polymer Science, 2016, DOI: 10/1002/APP. 43825, Vol 133, 43825-36
  61. Skauge T, Skauge A, Salmo, I.C., Ormehaug, P.A., Al-Azri, N., Wassing LM, Glasbergen G, Van Wunnik JN, Masalmeh SK, Radial and Linear Polymer Flow – Influence on Injectivity, SPE-179694-MS, paper for the SPE Improved Oil Recovery Conference held in Tulsa, Oklahoma, USA, 11–13 April 2016.
  62. Pettersen, Ø., and Skauge, A., Simulation of Complex Composite EOR Processes at Lab and Field Scale,  SPE-180098-MS, SPE EUROPEC at 78th EAGE Conference and Exhibition held in Vienna, Austria, 30 May–2 June 2016.
  63. Niklas Tyler Husefest, Supervisor Arne Skauge; Simulation of Enhanced Oil Recovery:  Polymer Injection at Adverse Mobility Ratio, M.Sc. UiB 2016
  64. Viken, A.L.; Skauge, T.; Spildo, K. Rheological properties of a hydrophobically modified anionic polymer: Effect of varying salinity and amount of hydrophobic moieties, J. Appl. Poly. Sci., 2016, 133 (23).
  65. Zamani N, Bondino I, Kaufmann R, Skauge A, Effect of porous media properties on the onset of polymer extensional viscosity, Journal of Petroleum Science and Engineering, Volume 133, September 2015, Pages 483-495, doi: 10.1016/j.petrol.2015.06.025
  66. Zamani, N., Kaufmann, R., Kosinski, P., and Skauge, A., Mechanisms of Non-Newtonian Polymer Flow Through Porous Media Using Navier–Stokes Approach, Journal of Dispersion Science and Technology, Volume 36, Issue 3, pages 310-325, 2015,DOI: 10.1080/01932691.2014.896221
  67. Zamani, N., Bondino, I., Kaufmann, R., and Skauge, A., Study in-situ rheology of polymer solution in comparison with bulk rheology using direct numerical simulation, Abstract and presentation at 7th International Conference on Porous Media & Annual Meeting, May 18 – 21, 2015, Padova, Italy
  68. Shaker Shiran B, and Skauge A., Wettability and Oil Recovery by Polymer and Polymer Particles, SPE-174568-MS, EORC Kuala Lumpur 2015, doi:10.2118/174568-MS
  69. Fabbri, C., de Loubens, R., Skauge, A., Ormehaug, P. A., Vik, B., Bourgeois, M., Morel, D., Hamon, G. (2015, August 11). Comparison of History-Matched Water Flood, Tertiary Polymer Flood Relative Permeabilities and Evidence of Hysteresis During Tertiary Polymer Flood in Very Viscous Oils. Society of Petroleum Engineers. doi:10.2118/174682-MS
  70. Salmo I, and Skauge A, Relative Permeability Functions for Tertiary Polymer Flooding, 18th European Symposium on Improved Oil Recovery in Dresden, Germany, 16. April, 2015
  71. Skauge Arne, Modelling of Hybrid Waterflood EOR Processes, 18th European Symposium on Improved Oil Recovery in Dresden, Germany, 16. April, 2015
  72. Skauge Tormod, Kvilhaug Olav A, Skauge Arne, Influence of Polymer Structural Conformation and Phase Behaviour on In-situ Viscosity, 18th European Symposium on Improved Oil Recovery in Dresden, Germany, 16. April, 2015
  73. Drønen, Karine; Roalkvam, Irene; Beeder, Janiche; Torsvik, Terje; Steen, Ida Helene; Skauge, Arne; Liengen, Turid., Heavy nitrate corrosion in anarobe aquifer injection water biofilm: Process modeling. ISMOS 5; 2015-06-02 – 2015-06-05
  74. Skauge, A. Modelling of hybrid EOR processes, 35th Workshop & Symposium IEA Collaborative Project on EOR, abstract and presentation, Beijing, China, 15-17 October 2014
  75. Salmo, I. and Skauge, A. Simulation of Polymer Flooding in Heavy Oil Reservoirs, 35th Workshop & Symposium IEA Collaborative Project on EOR, abstract and presentation, Beijing, China, 15-17 October 2014
  76. Drønen, Karine; Beeder, Janiche; Torsvik, Terje; Steen, Ida; Roalkvam, Irene; Skauge, Arne; Liengen, Turid, “Modelling of heavy nitrate-corrosion in anaerobe aquifer injection water biofilm: A case study in a flow rig, Environmental Science & Technology, Manuscript ID: es-2014-00839u.R1
  77. Kedir, A., Seland, J., Skauge, A. and Skauge, T., Nanoparticles for Enhanced Oil Recovery: Phase Transition of Aluminum-Crosslinked Partially Hydrolyzed Polyacrylamide at low salinity condition by Rheology and NMR, accepted for publication in Energy and Fuels, Energy Fuels, 2014, 28 (5), pp 2948–2958, Publication Date (Web): April 2, 2014 (Article), DOI: 10.1021/ef5000694
  78. Kedir, A., Seland, J., Skauge, A. and Skauge, T., Nanoparticles for Enhanced Oil Recovery: Influence of pH on Aluminum-Cross-linked Partially Hydrolyzed Polyacrylamide-Investigation by Rheology and NMR, Energy and Fuels, 2014, 28 (4), pp 2343–2351March 24, 2014 (Article), DOI: 10.1021/ef402376q, (2014)
  79. paper SPE 169747, SPE EOR Conference at Oil & Gas West Asia (OGWA), 31 March–2 April 2014, Muscat, Oman, DOI:10.2118/169747-MS
  80. Skauge, T.,  Vik, B.F., Ormehaug, P.A., Jatten, B.K., Kippe, V., Skjevrak, I., Standnes, D.C., Uleberg, K., Skauge, A. Polymer Flood at Adverse Mobility Ratio in 2D Flow by X-ray Visualization, paper SPE 169740, SPE EOR Conference at Oil & Gas West Asia (OGWA), 31 March–2 April 2014, Muscat, Oman, DOI:10.2118/169740-MS
  81. Solbakken,J.S., Skauge, A., and Aarra, M.G.,  Foam Behaviour in Low Permeability and Laminated Sandstones, Energy and Fuels (2014) 28 (2), pp 803–815, DOI: 10.1021/ef402020x
  82. Aarra, M.G., Skauge, A., Solbakken, J., and Ormehaug, P.A., Properties of N2- and CO2- Foams as a Function of Pressure, Journal of Petroleum Science and Engineering, (2014) Volume 116, April, Pages 72-80, DOI: 10.1016/j.petrol.2014.02.017
  83. Spildo; K., Sun,L., Djurhuus, K., and Skauge, A., A Strategy for Low Cost, Effective Surfactant Injection, Open Access, Journal of Petroleum Science and Engineering, (2014) Volume 117, May, Pages 8-14, DOI:10.1016/j.petrol.2014.03.006
  84. Shiran, B.S., and Skauge, A., Similarities and Differences of Low Salinity Polymer and Low Salinity LPS (Linked Polymer Solutions) for Enhanced Oil Recovery, Journal of Dispersion Science and Technology, Volume 35, Issue 12, November 2014, pages 1656-1664, DOI: /10.1080/01932691.2013.879532, (2014)
  85. Sun, L., Spildo, K., Djurhuus, K., and Skauge, A.: Salinity Selection for a Low Salinity Water-Low Salinity Surfactant Process, Journal of Dispersion Science and Technology, (2014), Volume 35, Issue 4, April 2014, pages 551-555, DOI: 10.1080/01932691.2013.800456
  86. B. Vik, E. Bastesen, A. Skauge, Evaluation of representative elementary volume for a vuggy carbonate rock—Part I: Porosity, permeability, and dispersivity, Original Research Article, Journal of Petroleum Science and Engineering, Volume 112, December 2013, Pages 36-47,  DOI: /10.1016/j.petrol.2013.03.029 (2013)
  87. B. Vik, K.E. Sylta, A. Skauge, Evaluation of representative elementary volume for a vuggy carbonate rock – Part II: Two-phase flow, Original Research Article, Journal of Petroleum Science and Engineering, Volume 112, December 2013, Pages 48-60, DOI: /10.1016/j.petrol.2013.10.023, (2013)
  88. Solbakken, J.S., Skauge, A., and Aarra, M.G., Supercritical CO2-Foam – The Importance of CO2 Density on Foams Performance, SPE 165296-MS, paper prepared for presentation at the SPE Enhanced Oil Recovery Conference held in Kuala Lumpur, Malaysia, 2-4 July 2013, doi:10.2118/165296-MS.
  89. Skauge, A., and Shiran, B.S., Low Salinity Polymer Flooding, EAGE 17th European Symposium on Improved Oil Recovery, St. Petersburg, Russia, 16 – 18 April 2013
  90. Zamani, N., Kaufmann, R.,  Skauge, T., and  Skauge, A., Pore Scale Modelling of Polymer Flow, EAGE 17th European Symposium on Improved Oil Recovery, St. Petersburg, Russia, 16 – 18 April 2013
  91. Skauge, A., Low Salinity Flooding: A Critical Review, EAGE 17th European Symposium on Improved Oil Recovery, St. Petersburg, Russia, 16 – 18 April 2013
  92. Skauge, A., Ormehaug, P.A., Vik, B.F., Fabbri, C., Bondino, I, and  Hamon, G., Polymer Flood Design for Displacement of Heavy Oil analyzed by 2D-imaging, EAGE 17th European Symposium on Improved Oil Recovery, St. Petersburg, Russia, 16 – 18 April 2013
  93. Shiran, B.S., and Skauge, A., Enhanced Oil Recovery (EOR) by Combined Low Salinity Water-Polymer Injection, Energy and Fuels, (2013),Vol 27, Issue 3, 1223–1235, DOI: 10.1021/ef301538e
  94.  Sorbie, K.S. and Skauge, A., Can Network Modelling Predict Multi-Phase Flow Functions?, SPWLA Journal, Petrophysics, Vol. 53, No. 6, page 401-409, Dec., (2012)
  95.  Skauge, A., Ormehaug, P:A., Gurholt, T., Vik, B., Bondino, I., and Hamon, G., 2-D Visualisation of Unstable Waterflood and Polymer Flood for Displacement of Heavy Oil, SPE 154292, paper prepared for presentation at the Eighteenth SPE Improved Oil Recovery Symposium held in Tulsa, Oklahoma, USA, 14–18 April 2012, doi:10.2118/154292-MS.

  96.  Shiran, B.S., and Skauge, A., Wettability and Oil Recovery by Low Salinity Injection, SPE-155651, paper prepared for presentation at the Improved Oil Recovery Symposium held in Muscat, Oman 15–18 April 2012, doi:10.2118/155651-MS.  
  97.  Shiran, B, S., and Skauge, Low salinity Polymer Flooding, IEA, Regina, Saskatchewan, Canada, August 26-30, 2012
  98. Bondino I., Nguyen R., Hamon G., Ormehaug P. A., Skauge A., Jouenne S., Tertiary polymer flooding in extra-heavy oil: an investigation using 1D and 2D experiments, core scale simulation and pore-scale network models, reviewed proceedings for the 25th International Symposium of the Society of Core Analysts, Austin, Texas, USA, 18th to 21st September 2011
  99. Bolandtaba, S. F., and Skauge, A., Network Modelling of EOR Processes; A Combined Invasion Percolation and Dynamic Model for Mobilization of Trapped Oil, Transport in Porous Media, 2011, DOI 10.1007/s11242-011-9775-0, Volume 89, Number 3, Pages 357-382
  100.  Rashidi. M., Blokhus, A. M., and Skauge, A., Viscosity and retention of sulfonated polyacrylamide polymers at high temperature, Journal of Applied Polymer Science, Volume 119, Issue 6, 15 March 2011, Pages: 3623–3629, DOI: 10.1002/app.33056
  101. Skauge, A., Vik, B, Ormehaug, P.A., 2-D visualisation of unstable waterfloods and polymer floods for displacement of heavy oil, abstract and presentation for the International Energy Agency Collaborative Project on Enhanced Oil Recovery, 32nd Annual Symposium and Workshop, Vienna, 17 to 19 October 2011
  102. Skauge, T., Djurhuus, K., Hetland, S., Spildo, K., and Skauge, A.,Offshore EOR Implementation -LPS Flooding, (Sub ID: 9882), the EAGE IOR Symposium 12th – 14th April 2011 in Cambridge, UK.
  103. Skauge, A., and Bolandtaba, S.F., Mechanistic Pore Scale Modelling of EOR Processes, (Sub ID: 9873), the EAGE IOR Symposium 12th – 14th April 2011 in Cambridge, UK.
  104. Skauge A, Horgen T, Noremark B, Vik B, Experimental Studies of Unstable Displacement in Carbonate and Sandstone Material, (Sub ID: 9880), the EAGE IOR Symposium 12th – 14th April 2011 in Cambridge, UK.
  105. Rashidi. M., Blokhus, A. M., and Skauge, A., Viscosity study of salt tolerant polymers, Journal of Applied Polymer Science Volume 117, Issue 3, 1 August 2010, Pages: 1551–1557, DOI: 10.1002/app.32011.
  106.  Alagic, E., and Skauge, A., Combined Low Salinity Brine Injection and Surfactant Flooding in Mixed-Wet Sandstone Cores, Energy Fuels, 2010, 24 (6), doi:10.1021/ef1000908 
  107. Skauge, T., Spildo, K., and Skauge, A, Nano-sized Particles For EOR, SPE-129933, Tulsa, Oklahoma, USA 2010, doi:10.2118/129933-MS. 
  108.  Spildo, K., Skauge, A., and Skauge, T., Propagation of colloidal dispersion gels (CDG) in laboratory core floods, SPE-129927-PP, Tulsa, Oklahoma, USA, 2010, doi:10.2118/129927-MS.
  109.  Skauge, A., and Bolandtab’a, S.F., Mechanistic modelling of EOR processes., the 31st Annual Workshop and Symposium of the International Energy Agency (IEA) Collaborative Project on Enhanced Oil Recovery (EOR), Aberdeen, Scotland, UK, 18-20 October 2010.
  110. Skauge, A., Delshad, M., and Kallevik, G., Simulation of hybrid EOR, combined low salinity brine and surfactant flooding, , abstract and presentation for the 31st Annual Workshop and Symposium of the International Energy Agency (IEA) Collaborative Project on Enhanced Oil Recovery (EOR), Aberdeen, Scotland, UK, 18-20 October 2010.
  111.   Skauge, T., Spildo, K., and Skauge, A., Offshore implementation of LPS, abstract and presentation for the 31st Annual Workshop and Symposium of the International Energy Agency (IEA) Collaborative Project on Enhanced Oil Recovery (EOR), Aberdeen, Scotland, UK, 18-20 October 2010.
  112. Spildo, K., and Skauge, A., A New Polymer Application for North Sea Reservoirs, SPEREE Letter, authors reply to Randy Seright’s discussion for SPEREE (June 2009) 427-432
  113. Spildo, K, Skauge, A., Aarra, M.G., and Tweheyo, M.T., A New Polymer Application for North Sea Reservoirs, SPERE&E, June 2009, 427 – 432, 555-558, doi:10.2118/113460-PA.
  114. Bolandtaba SF, MacKay E., Skauge A., Pore Scale Modelling of Linked Polymer Solution (LPS) – A New EOR Process, 2009, paper A09, proceedings from Improved Oil Recovery Symposium, Paris, France, April 27-29.
  115. Rashidi M, Sandvik S, Blokhus AM, Skauge A., Static and Dynamic Adsorption of Salt Tolerant Polymers, paper B26, proceedings from Improved Oil Recovery Symposium, Paris, France, April 27-29.
  116. Spildo K., Hustvedt S.B., Bjørsvik M., Skauge A., Nano-size Polymer Particles for Chemical EOR, 2009, abstract and presentation at Improved Oil Recovery Symposium, Paris, France, April 27-29 
  117. Rashidi M., Sandvik S., Blokhus A.M., and Skauge, A., Salt Tolerant Synthetic Polymers, the International Energy Agency Collaborative Project on Enhanced Oil Recovery, 30th Annual Symposium and Workshop, Canberra, Australia, 2009
  118. Bjørsvik, M., Høiland, H., and Skauge, A: “Physico-Chemical Characterization of Colloidal Dispersion Gels for Enhanced Oil Recovery,” Colloids and Surfaces A: Physicochemical and Engineering Aspects.
  119. Stavland, A. and Skauge, T., “Polymer Flooding – Risk of Shear Degradation“, presented at the PEA WGSO & Chemical EOR Forum, 2008.
  120. Spildo, K, Skauge, A., Aarra, M.G., and Tweheyo, M.T., “A New Polymer Application for North Sea Reservoirs,” SPE 113460, paper prepared for presentation at the 2008 SPE Improved Oil Recovery Symposium held in Tulsa, Oklahoma, U.S.A., 19–23 April 2008, doi:10.2118/113460-MS.
  121. Skauge, A., Fallah, S., and McKay, E.: “Modeling of LPS Linked Polymer Solutions,”  abstract and presentation for the International Energy Agency, IOR Symposium: Reservoir Characterization and Simulation for IOR/EOR,  Beijing, China, 2008 
  122. Bjørsvik, M., Høiland, H., and Skauge, A., ”Formation of colloidal dispersion gels from aqueous polyacrylamide solutions,” Colloids and Surfaces, A: Physicochem. Eng. Aspects, Volume 317, 1-3, 504-511, 20 March,  (2008), doi:10.1016/j.colsurfa.2007.11.025